Sequoia LISST-100X, Руководство пользователя

Страница: 34 / 144

22 LISST-100X User’s Guide
You MUST start the instrument in order to start the program on
the datalogger that controls the sampling. If you do not do that,
the LISST will never start sampling or react to the start and stop
conditions.
Note that starting the instrument is not necessarily the same as
starting sampling (unless you have a delay start of 0 minutes set
as your start condition). For example, if you have selected switch
start, then starting the instrument will start the program on the
datalogger, which will then start to look for the switch being flicked
to the “1” position. Only then will actual sampling begin.
If you select the No button, the warning below appears, informing
you how you can start the instrument.
When the instrument has been started, depending upon the Start
Conditions, text will be displayed approximately every 30 seconds
in the terminal window. At this point the user will know that the
instrument is running and is ready to be deployed. For our
example it will be displaying a message that reads “Waiting for
Mechanical Switch ON signal”
Step 19:
Collecting Data
When the start conditions are met the instrument will start
sampling. The green LED on the connector endcap will illuminate
each time a sample is acquired.
For our example we can move the white plastic lever on the