Sequoia LISST-100X, Руководство пользователя

Страница: 25 / 144

LISST-100X User’s Guide 13
We can now fill the chamber with clean, particle-free water.
Sequoia uses steam-distilled bottled water filtered through a 0.2
micron filter. Tap water may contain too many particles and may
also contain dissolved gas that can release and form small
bubbles on the optical surfaces.
Step 5: Install
software SOP 5.0
At this point the instrument is ready to go. Install the software that
is required for operation of the instrument. A software disk or USB
card is included with each instrument. In addition to the
communication and processing program the disk also contains
calibration files specific for your instrument. Insert the disk into the
CD- or DVD drive on your PC to install the software, or plug in the
USB-drive to a USB port.
Please note the following with respect to the software version
5.0:

On a 64-bit Windows PC, the software will be installed in
the following folder: C:\Program Files
(x86)\Sequoia\LISST100, while on 32-bit Windows
machines, the install folder will be C:\Program
Files\Sequoia\LISST100

The installer also creates a folder called C:\Program
Data\Sequoia\LISST100. This is the default folder for
saving your data, but you can change it in the software.
There are 2 very important files in this folder:
InstrumentData.txt and LISST.ini. These 2 files contain
various calibration parameters about your instrument and
the software will not work if you move these files to
another location.

Version 5.0 WILL NOT work with the older LISST-100
instruments (except for processing raw data files). It is
NOT possible to use version 5.0 to program and offload
data from a LISST-100 instrument, only a LISST-100X
will work with version 5.0 described in the following.

If you already have a LISST-100X and have the software
version 4.65 installed on your PC, you must manually
copy the InstrumentData.txt and LISST.ini file for your
instrument from their current locations to the C:\Program
Data\Sequoia\LISST100 folder before you can proceed.

More detailed information can be found in Appendix E:
Software Upgrade Installation Procedure on page 113.
Step 6: Start
LISST-SOP
program
Start the LISST-SOP software by selecting it from the Start menu.
The name LISST-SOP refers to the Standard Operating Procedure
functionality of the program. Appendix D: LISST-SOP Software
Button Description on page 111 describes the functions of each
button.