Sequoia LISST-100X, Руководство пользователя

Страница: 137 / 144

LISST-100X User’s Guide 125
Q: When I try to program the instrument I get this error (note: [Instrument1335] will change
depending on the serial number of your instrument):
A: Go to your C:\ProgramData\Sequoia\LISST100 folder and search for the LISST.INI file.
Open it up in Notepad or a similar text editor. Make sure that the section containing your
instrument calibration constants are located in the file. It not, copy them from the LISST.INI
file that was included on the ship disk for your instrument. Then re-save the edited LISST.INI
file in C:\ProgramData\Sequoia\LISST100.
Q: When I try to offload the data I get an error and the offload stops. I can talk to the
instrument and program it, but it will not offload.
A: It is possible that the Compact Flash Memory Card inside the instrument has come loose.
Open up the connector endcap and pull out the battery (it is not necessary to remove the
battery). Look inside the instrument, and you will see a faceplate with a cut-out for the
memory card:
Push on the memory card to make sure that it is fully seated in the memory card holder,
then try offloading data again. Take care not to push on the card ejector button when you
are pushing the memory card back in place.