Sequoia LISST-100X, Руководство пользователя

Страница: 27 / 144

LISST-100X User’s Guide 15
If you do not see the L100x:> prompt, click the Send button.
A set of two-letter commands can be typed into the box in the
lower section of the window. When the Enter key or the Send
button is pressed the command will be sent to the instrument.
The Start button sends a GO command to the instrument to start
the instrument sampling using the current settings. The STOP
button sends a CTRL-C to stop the sampling and to turn off the
main power. A list of the commands that can be sent to the
LISST-100X can be found in the section LISST-100X Command
Summary on page 79.
If the instrument is still in the Low Power Sleep Mode it will print
ZZZ to the screen every 30 seconds. To wake the instrument
from the Terminal window, press the Stop button immediately
after the ZZZ is displayed. The instrument will only respond to
the Stop button for 1 second after the ZZZ is displayed. After the
1 second the instrument is in a low power mode and will not
respond to commands for another 30 seconds.
Step 9:
Datalogger
The LISST-100X data logger uses a removable Compact Flash
Memory Card. The LISST-100X comes standard with 1GB
RAM, enough for 12,500,000 size distributions. The Compact
Flash Card can be removed (see Appendix H: Technical
Assistance & Troubleshooting on page 123). By using a PCMCIA
adapter or USB card reader the data files can be directly
transferred to the PC. However, the standard procedure is to
offload the files using the 2-m communication cable and the
LISST-SOP software.