Sequoia LISST-100X, Руководство пользователя

Страница: 82 / 144

70 LISST-100X User’s Guide
3

To load a pre-saved LISST Operating Procedure file (LOP)
enter the file name in the file box or click on the Browse
button to navigate to the correct file.

After the file is selected the appropriate settings will be
made. To apply these settings to the instrument press the
Apply or OK buttons.
LISST Operating Procedure files can be saved by clicking the
Save Summary to LOP button. The setting must have first been
sent to the instrument using the Apply button. The Summary
section will only update after the settings have been applied to
the instrument.
4

By selecting the Operating Mode Tab at the top of the main
window the screen below appears. This screen is used to
set the type of sampling; RealTime, Burst, or Continuous.
You can also select the samples per average and sample
rates on this screen.

The RealTime mode is used for real-time size distribution
displays. This mode sends the raw data to the LISST-SOP
software for conversion to Size Distribution and displaying
on the screen. No data is saved in the datafile.

The Burst and Fixed sample rate modes are used to save
data in the on-board datafile. The icons next to the various
values give a better understanding of their meaning. The
software automatically checks the values entered to make
sure that there is no conflict. For example, when a Samples
per Average value is entered, the minimum sample interval
is computed. If this value is less than the minimum
permitted the value will be changed to the minimum and the
text will turn red. A similar test is done on the Burst Interval
setting.
Operating
Mode set