Sequoia LISST-100X, Руководство пользователя

Страница: 129 / 144

LISST-100X User’s Guide 117
BioBlock Installation Instructions for the LISST-100X
Step 1) The BioBlock for the LISST-100X
is shipped fully assembled and ready to
mount onto the LISST-100X. Please note
that the main body of the BioBlock can be
used on the LISST-25X and LISST-100 in
addition to the LISST-100X. Therefore it is
important to specify which type of
instrument the BioBlock will be used with
at the time the order is placed. The photo
on the left shows the assembled BioBlock
next to the LISST-100X.
The BioBlock is shown in the Closed
(windows covered) position. This position
is best for correctly positioning the unit
during installation. The BioBlock should
be removed from the LISST-100X in the
Closed position to facilitate re-installing it
at a later date. The BioBlock may be
commanded to go to the Closed position
prior to installation by connecting it to the
LISST-100X and using the LISST-100X
software.
Do not manually rotate the
crank arm that drives the shutter.
The BioBlock has two main parts. The
main cylindrical body contains the motor,
batteries, and electronics. Mounted to the
end of the main body is the translating
shutter assembly with copper plates. The
shutter assembly is attached to the
rotating crank arm with a plastic arm.
Step 2) The image to the left shows how
the BioBlock is inserted between the
triangular Crossbar Standoffs of the
LISST-100X.