Section 05
ENGINE (4-TEC)
Subsection 04
(EXHAUST SYSTEM)
SMR2002-068_05_04A.FM
05-04-7
Installation
Installation is the reverse of the removal procedures.
After installation, ensure there is no coolant or ex-
haust gas leak when the engine is running. Test run
the engine while supplying water to the flushing con-
nector.
MUFFLER (RH)
Removal
Loosen both exhaust hose clamps
no. 15
and
discon-
nect the exhaust hoses
no. 7
and
no. 16
from the
muffler (RH)
no. 10
.
1. Disconnect inlet and outlet hoses from muffler (RH)
Detach the strap
no. 12
from the
muffler (RH) using
the spring installer/remover (P/N 529 035 559).
1. Muffler (RH)
2. Strap
3. Spring installer/remover
Carefully pull out the muffler (RH)
no. 10
.
Inspection
Inspect parts condition paying attention for cracks or
other damage. Check hoses. Replace any defective
part.
Installation
Installation is the reverse of the removal procedures.
After installation, ensure there is no coolant or ex-
haust gas leak when the engine is running. Test run
the engine while supplying water to the flushing con-
nector.
EXHAUST OUTLET
Removal
Remove the muffler (LH)
no. 6
. See above.
Remove the jet pump as an assembly. Refer to
PROPULSION SYSTEM.
1
F18D0NA
A00C3SA
3
F18D0OA
2
1
www.SeaDooManuals.net
Содержание GTX 4-TEC 5573 2002
