Section 04
ENGINE (DI)
Subsection 06
(BOTTOM END)
SMR2002-063_04_06A.FM
04-06-13
NOTE:
Do not use Loctite Primer N with this seal-
ant. The sealant curing time is similar to the Loc-
tite 518 without using the Primer N, which is 4 to
24 hours.
Make sure all locating dowels are in place.
1. Dowel
Crankcase Screws
Apply Molykote 111 below head of screws and
Loctite 518 on threads.
Torque crankcase screws to 12 N•m (106 lbf•
in
)
as per following sequence. Repeat procedure, re-
tightening all screws to 27 N•m (20 lbf•ft).
As a final step, torque only the M10 x 73.5 bolts
to 40 N•m (30 lbf•ft) as per following sequence.
Starter Drive Bearing
To install bearing
no. 23
of starter drive assembly,
use pusher (P/N 290 876 502) and handle (P/N 420
877 650).
1. Handle
2. Pusher
PTO Flywheel
Apply Loctite 243 (blue) on bolt
no. 22
.
Using the same tools as for disassembly proce-
dure, torque bolt
no. 22
to 115 N•m (85 lbf•ft).
Apply Loctite 648 on mating surface of PTO fly-
wheel and coupler.
Apply Loctite 243 (blue) to Allen screws
no. 21
of
coupler and torque to 23 N•m (17 lbf•ft).
Final Assembly
Add approximately 10 mL (.3 oz) of injection oil in
bottom of crankcase for each cylinder. This will give
an additional lubrication for the first engine startup.
F06D1PA
1
F07D09E
7
3
1
16
5
19
22
11
10
8
24
21
15
4
13
2
18
6
23
12
14
9
20
17
F07D09C
9
7
3
1
5
11
10
8
4
2
6
12
F06D32A
1
2
www.SeaDooManuals.net
Содержание GTX 4-TEC 5573 2002
