Section 05
ENGINE (4-TEC)
Subsection 09
(ENGINE BLOCK)
05-09-14
SMR2002_073_05_09A.FM
Oil Spray Nozzles
Remove oil spray nozzle
no. 16
and banjo screw
no. 17
from engine block.
1. Banjo screw
2. Oil spray nozzle
Check free movement of ball inside the banjo
screw. Clean Nozzle and banjo screw from dirt and
debris.
Installation
For installation, reverse the removal procedure.
Pay attention to the following details.
Torque oil spray nozzle to 18 N•m (160 lbf•
in
).
To install starter drive bearing
no. 21
of starter
drive assembly, use pusher (P/N 290 876 502) and
handle (P/N 420 877 650).
1. Handle
2. Pusher
Use
NEW
bushings when diameters are out of
specification.
If
OLD
bushings can be used again, make sure
they are at the same position as they were before.
Put bushings correctly in place. Top crankshaft
bushing halves have a bore which has to be placed
in the upper engine block.
1. Upper engine block half
2. Oil bore in engine block
3. Oil bore in bushing
Bushings have to be even with the engine block
split surface and their protrusions have to fit in the
notched areas in the engine block seat.
1. Bushing protrusion in engine block notch
Apply engine oil on all bushings, in the bottom area
of the cylinder bore and also on the band of the
piston ring compressor tool.
For proper installation of pistons, refer to PISTON
INSTALLATION elsewhere in this section.
NOTE:
Before installing the crankshaft, make sure
that the timing chain is on the crankshaft and the
chain tension guide has been installed first. Those
parts cannot be installed after as the crankshaft is
in place.
1
R1503motr38A
2
F06D32A
1
2
R1503motr35A
3
2
1
1
R1503motr36A
www.SeaDooManuals.net
Содержание GTX 4-TEC 5573 2002
