Section 12
PROPULSION SYSTEM
Subsection 02
(JET PUMP)
SMR2002-088_12_02A.FM
12-02-17
Using 2 screws previously removed from venturi,
secure impeller shaft holder tool (P/N 295 000 082)
to housing.
Install shaft holder tool in a vise.
1. Impeller shaft holder secured in a vise
To ease impeller installation, apply BOMBARDIER
LUBE lubricant on wear ring.
Insert impeller into wear ring. Manually rotate im-
peller and push so that it slides on impeller shaft
threads. Carefully engage threads making sure
they are well aligned.
Install impeller remover/installer tool into impeller
splines and tighten.
1. Impeller remover/installer tool
CAUTION:
Make sure thrust washer and bear-
ing are not wedged in shaft groove. To check,
manually pull and push jet pump housing, some
axial play must be felt.
Torque impeller to 115 N•m (85 lbf•ft) then remove
tools.
CAUTION:
Never use any impact wrench to tight-
en impeller.
Apply synthetic grease (P/N 293 550 010) on im-
peller splines.
Insert a new boot
no. 2
and ring
no. 3
to impeller.
1. Boot and ring
Anti-Rattle System
Install spring
no. 34
on slider
no. 35
.
1. Spring
2. Slider
F00J0HA
1
F00J08A
1
F00J10A
1
F00J0VA
2
1
www.SeaDooManuals.net
Содержание GTX 4-TEC 5573 2002
