schmersal bp408, Руководство по установке

Страница: 96 / 122

96 Installation manual of system “bp408” - Commissioning
Switching on the inspection control deletes all calls and the command transmitters
for car calls, hall calls and for higher-level control systems are switched off. All
devices of the safety circuit remain effective.
If the lift is switched back to normal operation, a correction run for the floor counter
can be triggered after a call. For control systems with an absolute encoder, no
correction run is necessary.
8.8 Inspection control Shaft pit
The inspection control in the shaft pit serves for testing and maintenance purposes.
The return to normal operation of the lift may only take place after resetting the
inspection switch to its normal position and must call for the intervention of a
competent person responsible for the maintenance.
In addition, a return to normal operation effected in the shaft pit by the inspection
control may only take place under the following conditions:
 Shaft doors, which allow access to the shaft pit, are closed and locked
 all emergency brake switches in the shaft pit are not actuated
 an electric reset device outside the shaft is actuated