schmersal bp408, Руководство по установке

Страница: 35 / 122

Installation manual of system “bp408” - The control system “bp408” 35
5.7.2 Technical features
bp408
Technical features
Regulations EN 81-1 / -2; EN 81-20 / -50
Mechanical data
Dimensions (H x W x D) 315 x 100 x 80 mm
Connection version Screw and plug terminals
Installation position To be installed lying on vertically installed assembly plate
in the control cabinet
Control cabinet assembly At least IP2xD
Guidelines Lift Directive (2014/33/EU), RoHS (2011/65/EU),
EMV (2014/30/EU)
Electrical data
Supply voltage 24 V DC +/-20%
Ports - 8 inputs, 24 VDC, input current 10 mA
- 8 outputs, 24 VDC, max. 280 mA
- 16 inputs / outputs (calls), 24 V DC,
protected from overcurrent and short-circuit
- PTC resistor input (PTC)
- Safety circuit inputs 48 V AC/DC, 110 V AC and 230 V AC
- Safety circuit inputs 48 V AC/DC, 110 V AC and 230 V AC
- 3 preselection relays (normally open contact)
-
4 freely programmable relays (changeover contact)
Interfaces - CAN 1 (car), CANopen Lift (CiA 417)
- CAN 2 (shaft/group) CANopen Lift (CiA 417)
- USB Host
- USB Device
- Ethernet 10/100Mbit, full-duplex (network connection)
- RS-485 (DCP)
-
RS-232 (Gateways, e.g. for Profibus, Modbus, etc.)
Indicators and control element Graphic display with navigation keys:
- second menu level and separate call menu
-
permanent display of door status (max. 3), safety circuit,
travel signal, lift state and direction independent of the menu
Performance data
Application range Passenger and freight lifts
Stops up to 127
Operating mode - Cable elevators regulated/unregulated
- Hydraulic lifts
Copying tool digital with absolute encoder system
Software
Memory Fault, maintenance and message stack with max. 128
entries
Language settings German, English, French, Italian, Swedish, Dutch
Groups integrated group algorithms for up to 8 lifts
Functions For comprehensive standard and special functions, see
chapter 5.2
Remote-controlled control menu Via WLAN/Ethernet with mobile device or PC with
WinMOS
®
300 as APP or PC software
Backup/update Backup and update via USB stick