schmersal bp408, Руководство по установке

Страница: 9 / 122

Installation manual of system “bp408” - Safety instructions 9
2 Safety instructions
NOTE!
Before installing and commissioning this device, please read these safety
instructions and warnings carefully and follow all the warning signs attached to the
device. Make sure the warning signs are legible and replace missing or damaged
signs.
2.1 Qualified personnel
Qualified personnel within the meaning of the documentation or warnings on the
product are persons, who are familiar with setup, assembly, commissioning,
operation and maintenance of the product and have the relevant qualifications for
the activity, e.g.:
 Training and briefing or authorisation to switch on and off, earth and label the
current circuits and devices according to the standards of the safety technology.
 Training and briefing in maintenance and use of appropriate safety equipment
according to the standards of the safety technology.
 First-aid training.
2.2 Safety instructions for control system
ATTENTION!
Excerpts from chapter 5 of “DGUV 209-053 Activities performed on lifts” (edition
02/2017):
5.1 Notification
Before starting work on an existing lift, the fitter must notify the person using
(operating) the lift or his representative and inform him about the extent of work
and expected duration of work.
After the work is completed, a notice of departure must be given.
…
5.2 Blocking the lift
Before beginning work on a lift, the fitter must safely block it and put up a sign that
is clearly visible and durable and says, for example, “Lift out of service”, at every
shaft access.
…
5.3 Safety of shaft accesses
Open shaft accesses must be blocked such that unauthorised persons (third
parties) are prohibited from entering them. Work for which doors of the lift shaft
have to be opened must only be carried out when the lift car is behind them. If this
is not possible, additional measures must be taken.
…