schmersal bp408, Руководство по установке

Страница: 12 / 122

12 Installation manual of system “bp408” - Safety instructions
2.3 Installer and operator requirements
ATTENTION!
 The control system “bp408” is built to state-of-the-art standards and is safe to
operate. Hazards occur only when untrained personnel use devices incorrectly
or for unintended purposes.
 Smooth and safe operation of devices requires proper transport, storage, setup
and assembly as well as careful operation and maintenance.
 Refrain from any working method that impairs safety of the devices.
 Unauthorised modifications and alterations, which may impair safety of the
devices, are not permitted.
 During operation, the drive units have dangerous, live, moving or rotating parts.
Hence, they can cause injuries or material damage, for example, if the
necessary covers are removed without permission or in case of poor
maintenance.
 Only qualified personnel may be assigned to work on the devices. The
personnel must always have the supplied operating instructions and all the
product documents available during work and follow them consistently. It is
forbidden for unqualified personnel to work on or near the devices.
 The operator is responsible for bringing the drive into a safe state in case of
failure of the devices because otherwise it can result in injuries or material
damage.
 The packaging material must be disposed of in an environmentally friendly way;
recycle paper, plastic, metal, electronic components etc.
WARNING!
Before each intervention, disconnect the devices from the mains and check the
absence of voltage.