schmersal bp408, Руководство по установке

Страница: 89 / 122

Installation manual of system “bp408” - Commissioning 89
8.3 Checklist before switching on the control system
WARNING!
Please note the following points after reinstallation or modifications. Continue only
after you have responded to every question with a "Yes".
A weight compensation has taken place between car and counterweight.
Yes
□
The mechanical brake is set.
Yes
□
The car is located at a sufficient distance from the limit switches
(at least 1 m).
Yes
□
The mains voltage of 3 x 400 V AC is available.
Yes
□
Buffers are installed and functional.
Yes
□
Speed limiter and safety gear are installed and
functional.
Yes
□
Safety circuit contacts of shaft and car are installed and
connected.
Yes
□
Have you observed and applied the safety instructions in the chapter "Safety instructions"? Yes
□
A control system of Böhnke + Partner GmbH includes:
 Circuit diagrams with unique allocation through a controlling number (e.g.: 25461)
 Parts lists,
EU Type-examination certificate and
Certificates of conformity for the system module bp408,
 Terminal diagrams,
 Basic setting,
 plans of terminal connections and general instructions regarding control system
bp408.
Are these documents completely available?
Yes
□
Have you followed the circuit diagrams that belong to the control system?
Yes
□
Have you observed and applied the interference suppression measures in the chapter
"Interference suppression measures"?
Yes
□
Has the correct connection and secure fit of all clamping points
been checked?
Yes
□
Is the main switch switched off?
Yes
□
Is the voltage test module STM-02 connected (see chapter 8.2)?
Yes
□
Check the power supply. Are L1, L2, L3, N and PE correctly connected (clockwise-
rotating field)?
Yes
□