schmersal bp408, Руководство по установке

Страница: 33 / 122

Installation manual of system “bp408” - The control system “bp408” 33
5.5 Assemblies for bp408
For the control system bp408 Böhnke + Partner GmbH has currently provided the
following assemblies:
 Landing panel board CAP-02 (8 I/O)
 Car electronics CLK-03
 CAN-Wireless-Interface CWI-01
 CAN-I/O module CIO-01 (32 I/O)
 CAN serial interface CSI-01
Other components from various manufacturers such as absolute encoders or
panels, which comply with the standard CiA 417, are available and can be used.
An overview of deliverable CANopen lift components and their description can be
found on the Internet under www.CANopen-Lift.org.
Figure 15:
Board CAP-02 for connecting the hall calls
to the CANopen lift bus
Figure 16:
Board CLK-03 for connecting the car
electronics to the
CANopen lift bus
Figure 17:
Board CWI-01 for remote control of the
control system (e.g. from the car) using a
mobile device (phone, tablet, notebook).
Figure 18:
Board CIO-01 for connecting 32
inputs/outputs or calls
Figure 19:
Board CSI-01 for using as
repeater or bridge