schmersal bp408, Руководство по установке

Страница: 37 / 122

Installation manual of system “bp408” - The control system “bp408” 37
5.7.3.3 Safety circuit status bar
The safety circuit status bar is located on the right side of the display. It is displayed
in all menus. In the safety circuit status bar, the status of the safety circuit of
terminals is displayed:
1 → passive safety circuit (terminal 10)
2 → Emergency stop (terminal 11)
3 → Shaft door (terminal 12)
4 → Car door A (terminal 12A)
5 → Car door B (terminal 12B)
6 → Bolt (terminal 13)
5.7.3.4 Control panel
The control panel is located below the display.
The control panel comprises 7 keys, using which
you can navigate through the different menus,
status information is displayed and parameters
can be changed. The keys of the control panel
must be arranged as central navigation block with
keys “Up”, “Down”, “Left”, “Right” and “OK”. The
“Call/End” key is located to its left and “Info/Set”
key to its right.
Figure 23:
The safety circuit status bar is displayed in all menus
Figure 24:
You can navigate through the menus
using keys of the control field.