schmersal bp408, Руководство по установке

Страница: 39 / 122

Installation manual of system “bp408” - The control system “bp408” 39
5.7.5 Service menu
In the service menu of bp408, parameters and time, which are not safety-relevant
and which can be changed during ongoing operation, can be adjusted, e.g. door
time, energy-saving functions BlueModus on/off etc.
Start in the service menu:
Press the “OK” key, the display automatically
jumps to the service menu. If a service code
(secret code) is agreed, the correct code must
be entered. A service code is not set by
default by Böhnke + Partner GmbH.
After entering the correct code, you can call
and all menus and parameters of the service
menu and change during on-going operation.
If the control system is to be encrypted again
after exiting the service menu, press the “Left”
key until the following question appears in the
LCD: “Activate service code?”
Confirm with “OK” key. The following note
will appear shortly:
Service code activated
You will then return to the start menu of bp408.
The service code can be changed or reset in the service menu under
MISCELLANEOUS > ACCESS CODES > SERVICE CODE
.
Figure 27:
The service menu of bp408
Figure 28:
Code activation