Sanyo VPC-MZ1 страница 4 Скачать руководство пользователя | Manualshive

Страница: 4 / 144

background image

BEFORE READING THE MANUAL

Microdrive and PowerPC are registered trademarks of International Business Machines
Corporation.

Apple, Macintosh and QuickTime are trademark or registered trademarks of Apple Computer Inc.

Windows and Windows NT are registered trademarks of Microsoft Corporation.

CompactFlash is a trademark of SanDisk Corporation and handed over to CFA (CompactFlash
Association).

All other company and product names are registered trademarks or trademarks of their respective
owners.

Regarding the data storage media

œ

This digital camera can use both CompactFlash and Microdrive cards for data storage. This
manual is written with the premise that CompactFlash cards are used. In this manual,
CompactFlash and Microdrive cards are both referred to as “card.”

Caution

œ

It is forbidden to copy this manual, whole or in part, without prior written permission.

œ

All images and illustrations given in this manual are for explanation purposes and may differ
slightly from that of the actual product. Also, actual specifications are subject to change without
prior notice and therefore may differ from the contents of this manual.

œ

Sanyo Electric shall not be held responsible for any problems resulting from the use of this
digital camera.

œ

Sanyo Electric declines all responsibility for damages due to improper use of the camera, failure
to adhere to the instructions given in this manual, or repairs or changes done by those other
than a technician authorized by the manufacturer.

œ

Sanyo Electric shall not be held responsible for any damage caused by optional devices or
consumable items used with the digital camera other than those supplied with the digital
camera or those specified by Sanyo Electric.

œ

Sanyo Electric shall not be held responsible for any losses or loss of revenue resulting from the
loss of data caused by the malfunction, or the repairing of a malfunction, of the digital camera.

œ

The images captured with this camera will differ in quality from pictures taken with a standard
film camera.

Symbols used in this manual

NOTE

Points giving some extended instructions or special points to pay attention to.

HINT

Points that may prove useful when using the digital camera.

HELP

In case of problem, this may help in certain situations.

[page xx]

Refer to the page indicated in brackets for detailed information.

SX212/EX, /E, /U (VPC-MZ1EX, VPC-MZ1E, VPC-MZ1 GB) Fri. July, 06/2001

1

English

«
...
2
3
4
5
6
...
»

Содержание VPC-MZ1

















































































































































Отзывы:

Нет отзывов

Похожие инструкции для VPC-MZ1

Бренд: Samsung Страницы: 24

Бренд: Samsung Страницы: 100

Бренд: Samsung Страницы: 107

SL820 - Digital Camera - Compact

Бренд: Samsung Страницы: 22

SL820 - Digital Camera - Compact

Бренд: Samsung Страницы: 95

Бренд: Samsung Страницы: 103

Бренд: Samsung Страницы: 99

SL502 - Digital Camera - Compact

Бренд: Samsung Страницы: 102

Бренд: Samsung Страницы: 98

SL35 - Digital Camera - Compact

Бренд: Samsung Страницы: 22

Бренд: Samsung Страницы: 98

SL35 - Digital Camera - Compact

Бренд: Samsung Страницы: 102

SL201 - Digital Camera - Compact

Бренд: Samsung Страницы: 98

SL102 - Digital Camera - Compact

Бренд: Samsung Страницы: 24

Бренд: Samsung Страницы: 106

SL720 - Digital Camera - Compact

Бренд: Samsung Страницы: 96

SL820 - Digital Camera - Compact

Бренд: Samsung Страницы: 95

Бренд: Samsung Страницы: 99

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды