Sabio 2010D, Руководство по эксплуатации

Страница: 14 / 182

Introduction Page 1-6
_________________________________________________________________
Operation Modes:

Manually through use of print panel 42-button membrane keypad and
display, external user supplied keyboard or optional RS232 or USB
ports

Automatically by remote contact closures, internal timer or RS232
or USB ports
Electronics:

32-bit RISC CPU with SD Card interface for storage of software and
user configuration; battery-backed real-time clock; 32-bit
floating point math computations; capacity for future
enhancements

Co-processor CPU for precise dilution and valve control

42 button membrane keypad

640 X 480 pixel color graphic TFT Liquid Crystal Display

PWM servo loops for precise control of UV lamp intensity and
temperature levels
User IO and Networking

8 Status input/outputs standard, expandable to 24 programmable
status I/O bits for control and monitoring of calibrator functions

Optional solenoid drivers for interfacing with six 3 watt 24 VDC
instrument calibration solenoids

Up to two serial data communications ports

Optional Centronics parallel printer port

Optional external PS2 keyboard printer port

Compressed air source control circuit provides switched 5 VDC, 12
VDC or 24 VDC

Optional Network Interface Card for connection to Ethernet,
Internet and USB networks
Power:

Standard 96 - 264 VAC, 150 - 300 VA, 50/60 Hz operation
Mechanical:

Size 5.2" (13.3 cm) high X 17" (43.2 cm) wide X 20" (49.5 cm) deep.
Size varies with rack mount kit and other options

Weight:
- Basic calibrator with ozone generator 19 lbs. (8.6 kg)
- With ozone generator and photometer 24 lbs. (10.9 kg)