Sabio 2010D, Руководство по эксплуатации

Страница: 13 / 182

Introduction Page 1-5
_________________________________________________________________
Ozone Generator:

Output range 0.05 - 1.0 PPM at 5 SLPM instrument flow (Optional
extended output range 0.05 - 1 PPM at 10 SLPM instrument flow)

Ac 2% of set point or + 3 PPB at 5 SLPM

Nominal ozone flow of 100 SCCM maintained 1 SCCM by
precision flow controller

UV lamp maintained at 50 + 0.1 oC

Optional UV optical servo control loop

Optional UV absorption photometer
Internal UV Absorption Photometer Option :

Ozone monitoring ranges 100 PPB to 20 PPM full scale

Lin 1 PPB or + 1 percent of full scale, whichever is
greater

Pre 1 PPB

Lower detectable limit 0.8 PPB

Zero drift for 24 hours and 30 days less than 1 PPB

Span drift for 24 hours and 30 days less than 0.5 percent of reading

Lag time less than 10 seconds

Rise and fall time of 95 percent of final reading less than 60 sec
at 500 SCCM sample flow rate

Nominal flow rate of 500 SCCM monitored by mass flow meter

Internal sample vacuum pump

Recorder and data acquisition system analog outputs

Operating temperature 5o - 40 oC
Calibration Definitions:

Twenty user defined calibration sequences with up to 20 points per
sequence

Calibrations may be gas blends, ozone or GPT

Two diluent gas definitions and 20 source gas standard definitions

Twenty timer-driven calibration routines that perform predefined
calibration sequences on a calendar of events