Sabio 2010D, Руководство по эксплуатации

Страница: 121 / 182

Serial Communications Page 7-19
_________________________________________________________________
If no response is received for a certain time period, the master
program should time-out and the command should either be aborted
or re-sent (for a limited number of re-tries).
Commands
The following pages list the commands available to the Model
2010D
and their implementation. Following the command list, a
description of each command is presented with the formats of the
command.
Following is a glossary of common abbreviations, symbols and
fields that may be found within the command descriptions.
Other, more specialized fields are described within the command
descriptions:
Monitor Labs Commands
Hex Decimal
@
Start of Command Character 40 64
,
Comma (field separator) 2C 44
<ACK>
Acknowledge 06 06
<NAK>
Negative Acknowledge 15 21
<CR>
Carriage Return Character 0D 13
{Cmd}
Command Word
{Addr}
Address
CHK
Checksum (2 or 4 byte hex)
ER
Error code (2 bytes)
Common Data and Parameter Fields for Commands
{seq name}
The name of a calibration sequence. It is
not necessary to spell out the entire
sequence name; the first few characters will
suffice as long as they are unique. If more
than one sequence starts with the characters
in the {seq name} field, an error will be
returned.
{point}
A sequence point. This can be a number
between 1 and 20. If the field is empty,
either the first or next point will be
selected, depending upon the context.