manualshive.com logo in svg

Rohde & Schwarz R&S CMW-KM300, Руководство пользователя, Страница: 78 / 388

Поделиться
Скачать
Rohde & Schwarz R&S CMW-KM300 Скачать руководство пользователя страница 78

NB-IoT Signaling

R&S

®

CMW-KM300/-KS300

78

User Manual 1178.5689.02 ─ 06

"Continuous
UL"

Only UL grants are sent. The provided data rate is 158.5

 

kbps.

This scheduling can be used for multi-evaluation measurements.
This scheduling cannot be used for end-to-end data connections.

"Continuous
DL"

Only DL grants are sent. The provided data rate is 79.5

 

kbps using

the maximum number of subframes 10.
This scheduling can be used for BLER tests.
This scheduling cannot be used for end-to-end data connections.

"Continuous
DL 95

 

kbps"

Only DL grants are sent. The provided maximum data rate is 95

 

kbps

with the number of subframes set to 10.
This scheduling can be used for BLER tests.

"No schedul-
ing"

No UL or DL grants are sent. The other settings in this section are
ignored.
This scheduling can be used to check whether the UE transmits with-
out permission.

Remote command: 

CONFigure:NIOT:SIGN<i>:CONNection:UDEFined:UDPattern

Subcarriers, Start Subcarrier

Number of scheduled subcarriers and offset of the first scheduled subcarrier from the
edge of the transmission bandwidth.

Remote command: 

CONFigure:NIOT:SIGN<i>:CONNection:UDEFined:UL[:SET<setNr>]
CONFigure:NIOT:SIGN<i>:CONNection:UDEFined:DL[:SET<setNr>]

MCS Index

MCS index value. It determines the modulation scheme and the transport block size,
which are displayed for information.

Remote command: 

CONFigure:NIOT:SIGN<i>:CONNection:UDEFined:UL[:SET<setNr>]
CONFigure:NIOT:SIGN<i>:CONNection:UDEFined:DL[:SET<setNr>]
CONFigure:NIOT:SIGN<i>:CONNection:UDEFined:UL:MCSindex?
CONFigure:NIOT:SIGN<i>:CONNection:UDEFined:DL:MCSindex?

Resource Units, Subframes

Number of resource units for the UL and number of subframes for the DL.

The settings must match the UE release capability, see 

"Transport block size (TBS) "

on page 25.

Remote command: 

CONFigure:NIOT:SIGN<i>:CONNection:UDEFined:UL[:SET<setNr>]
CONFigure:NIOT:SIGN<i>:CONNection:UDEFined:DL[:SET<setNr>]

Repetitions

Selects the number of repetitions of each transmission.

Remote command: 

CONFigure:NIOT:SIGN<i>:CONNection:UDEFined:UL[:SET<setNr>]
CONFigure:NIOT:SIGN<i>:CONNection:UDEFined:DL[:SET<setNr>]

GUI Reference

深圳德标仪器 

135-1095-0799

Содержание R&S CMW-KM300





































































































































































































































































































































































































Отзывы:

Нет отзывов