manualshive.com logo in svg

Rohde & Schwarz R&S CMW-KM300, Руководство пользователя, Страница: 349 / 388

Поделиться
Скачать
Rohde & Schwarz R&S CMW-KM300 Скачать руководство пользователя страница 349

NB-IoT NPRACH Measurement

R&S

®

CMW-KM300/-KS300

349

User Manual 1178.5689.02 ─ 06

Figure 4-16: Modulation limit settings

Remote command: 

CONFigure:NIOT:MEAS<i>:PRACh:LIMit:EVMagnitude
CONFigure:NIOT:MEAS<i>:PRACh:LIMit:MERRor
CONFigure:NIOT:MEAS<i>:PRACh:LIMit:PERRor
CONFigure:NIOT:MEAS<i>:PRACh:LIMit:FERRor

4.3.6.2

 

Power Dynamics Limits

Access: "NPRACH" tab > "Config" hotkey > "Limits" > "Power" > "Dynamics" section.

Transmission at excessive uplink power increases interference to other channels. A too
low uplink power increases transmission errors. For NPRACH transmission, 3GPP
defines a time mask. The mask contains limits for the UL power during preamble trans-
mission (transmit ON power), without preamble transmission (transmit OFF power) and
the power ramping in-between.

The ON power is specified as the mean UE output power over the preamble (more
exactly, over the NPRACH measurement period, see 

Table 4-1

). For the OFF power,

the mean power has to be measured for 1 ms before and after the preamble. A transi-
ent period of 20 µs next to the NPRACH measurement period is excluded.

The following figure provides a summary of the time periods relevant for ON and OFF
power limits.

Preamble

ON power requirement

(NPRACH measurement period)

20 µs

20 µs

OFF power requirement

(1 ms – 20 µs)

1 ms (OFF)

1 ms (OFF)

OFF power requirement

(1 ms – 20 µs)

Figure 4-17: Measurement periods for ON/OFF power

The OFF power must not exceed -48.5 dBm. The ON power must be in the range
-18.5

 

dBm to -3.5 dBm.

GUI Reference

深圳德标仪器 

135-1095-0799

Содержание R&S CMW-KM300





































































































































































































































































































































































































Отзывы:

Нет отзывов