Preface
R&S
®
CMW-KM300/-KS300
11
User Manual 1178.5689.02 ─ 06
1.3
How to Read Firmware Application Chapters
Each firmware application is described in a separate chapter. These chapters can be
read independently of each other. However, they are all organized as follows:
1. General description
2. Application sheets (optional)
3. GUI reference
4. Programming examples
5. Command reference
1.3.1
General Description
This chapter provides a general description of the firmware application, independent of
a specific operation mode (manual or remote control). Background information related
to the network standard is given as far as it is directly related to configurable parame-
ters.
1.3.2
Application Sheets
This optional chapter provides short application examples for selected issues and rela-
ted background information.
1.3.3
GUI Reference
The GUI reference describes the manual operation of the firmware application via the
graphical user interface (GUI).
The description of a configuration dialog usually starts with a screenshot presenting the
preset values of the parameters. Sometimes, preset values are modified to enable hid-
den parts of a dialog. Below the screenshot, all shown parameters are described. For
each single parameter, a link to the corresponding command description in the com-
mand reference is provided. Ranges for numeric parameters and reset values are
given there.
For measurement results, links to the corresponding command descriptions are provi-
ded (commands to retrieve the results).
1.3.4
Programming Examples
The programming examples show how to control and configure the firmware applica-
tion via a remote-control program and how to retrieve measurement results. The exam-
ples consist of comprehensive command sequences. You can check just a single com-
How to Read Firmware Application Chapters
深圳德标仪器
135-1095-0799