Rohde & Schwarz R&S CMW-KM300, Руководство пользователя, Страница: 77 / 388

NB-IoT Signaling
R&S
®
CMW-KM300/-KS300
77 User Manual 1178.5689.02 ─ 06
Remote command:
CONFigure:NIOT:SIGN<i>:CONNection:RMC:DL
Repetitions
Selects the number of NPDSCH repetitions.
Remote command:
CONFigure:NIOT:SIGN<i>:CONNection:RMC:DL
2.3.11.4 User-Defined Scheduling Settings
Access: "Config" hotkey > "Connection" > "User-Defined Scheduling" section.
The parameters in this section apply if "Scheduling Type" on page 74 = "User defined".
The UL settings are used for NPUSCH format 1. The settings for NPUSCH format 2
are fixed.
There are dependencies between the settings. Configure the UL or DL settings from
the top left to the bottom.
For valid parameter combinations, see Chapter 2.2.10, "User-Defined Scheduling" ,
on page 24.
Figure 2-46: Settings for user-defined scheduling
Pattern ...........................................................................................................................77
Subcarriers, Start Subcarrier .........................................................................................78
MCS Index .................................................................................................................... 78
Resource Units, Subframes .......................................................................................... 78
Repetitions .................................................................................................................... 78
Pattern
The signaling application sends a UL grant or a DL grant to the UE at each possible
search space occasion.
The pattern defines the sequence of the grants.
"Alternating
DL/UL" Alternating DL grants and UL grants are sent. The provided data rate
is 3.2
kbps on DL and 150 kbps on UL. See also "Maximal possible
throughput" on page 27.
This scheduling can be used for end-to-end data connections.
GUI Reference
深圳德标仪器
135-1095-0799