Rohde & Schwarz R&S CMW-KM300, Руководство пользователя, Страница: 79 / 388

NB-IoT Signaling
R&S
®
CMW-KM300/-KS300
79 User Manual 1178.5689.02 ─ 06
2.3.11.5 HARQ Settings
Access: "Config" hotkey > "Connection" > "HARQ" section.
The following parameters configure the HARQ procedure for downlink and uplink trans-
missions.
Figure 2-47: Settings for HARQ procedure
HARQ ............................................................................................................................79
No. of HARQ Processes ............................................................................................... 79
Max. No. of Transmissions ............................................................................................79
HARQ
Enables or disables hybrid automatic repeat request (HARQ).
Remote command:
CONFigure:NIOT:SIGN<i>:CONNection:HARQen
No. of HARQ Processes
Specifies the number of HARQ processes.
Remote command:
CONFigure:NIOT:SIGN<i>:CONNection:NUMHqpc
Max. No. of Transmissions
Specifies the maximum number of transmissions, including initial transmissions and
retransmissions.
Remote command:
CONFigure:NIOT:SIGN<i>:CONNection:MAXNumtr
2.3.11.6 NPDCCH Settings
Access: "Config" hotkey > "Connection" > "NPDCCH" section.
The following parameters configure narrowband physical downlink control channel
(NPDCCH) as defined in 3GPP TS 36.213.
For overview of physical DL channels description, refer to Chapter 2.2.6, "Physical DL
Channels and Signals" , on page 20.
Figure 2-48: NPDCCH settings
GUI Reference
深圳德标仪器
135-1095-0799