Preface
R&S
®
CMW-KM300/-KS300
12
User Manual 1178.5689.02 ─ 06
mand of a sequence to get an example for the syntax of this single command. But you
can also consider an entire sequence showing the commands in the context of a com-
mand script, under consideration of dependencies and required orders of the com-
mands.
The command sequences are written with the intention to list most commands of the
firmware application. They do not show the fastest way for a given configuration task.
The fastest way would use many reset values and omit the corresponding commands.
The examples are referenced by the command descriptions of the command refer-
ence.
1.3.5
Command Reference
The command reference provides information on the remote commands of the firm-
ware application. The commands are grouped according to their function.
Each command description indicates the syntax of the command header and of the
parameters. For input parameters, the allowed ranges, reset values and default units
are listed. Most commands have a command form and a query form. Exceptions are
marked by "Setting only", "Query only" or "Event". Furthermore, a link to the program-
ming examples is provided and the first software version supporting the command is
indicated.
How to Read Firmware Application Chapters
深圳德标仪器
135-1095-0799