SMIQ
Basic Operating Steps
1125.5555.03
E-8
2.25
Quick selection of
a parameter
The quick selection of a parameter reduces the number of operating steps if
several parameters are set successively. The menu cursor can directly be set
further from line to line in the column of the setting values by pressing the
[SELECT] key.
The menu cursor wraps from the setting value of a parameter to the setting
value of the parameter in the next line.
The column of the setting values can be exited at each position by pressing
the [RETURN] key.
2.2.4 Triggering
Action
Lines in the setting menu which are marked with the " " symbol at the end of the line qualify an action
which can be carried out. Instruction SEARCH ONCE in the LEVEL-ALC menu, e.g., switches on
level control for level calibration for a short period of time.
Trigger action
Ø
Set the menu cursor to the respective instruction.
Ø
Press the [SELECT] key.
The action is triggered.
While the action is carried out, the instruction remains framed by the
selection mark.
2.2.5
Quick Selection of Menu (QUICK SELECT)
The keys of the QUICK SELECT control field are used to call selected menus quickly by one keystroke.
Store menus
Ø
Establish the desired operating status of the current menu.
Ø
Press the [ASSIGN] key.
Ø
Press key [MENU1] or [MENU2].
The current menu is stored as menu1 or menu2. That is to say, 2 menus
can be stored in total.
Call menus
Ø
Press key [MENU1] or [MENU2].
Menu1 or menu2 stored is displayed. Exactly the operating status which was
current at the point of time of storing is reconstructed.
