manualshive.com logo in svg

Rohde & Schwarz 1125.5555.02, Руководство по эксплуатации

Поделиться
Скачать
Rohde & Schwarz 1125.5555.02 Скачать руководство пользователя страница 312

SMIQ

Enhanced Functions For Digital Standard 3GPP W-CDMA (FDD)

1125.5555.03

E-9

2.243

2.15.3.1.2 Channel 

Coding

Many tests can be found in [1] and [3] all of which require channel-coded measurement channels, so-
called Reference Measurement Channels. Types 12.2 kbps, 64 kbps, 144 kbps and 384 kbps are
indicated for each link direction.
In addition, the SMIQ can simulate an AMR voice channel according to [5]. The detailed structure of
these channels is described in the following documents:

Table 2-27

References to measurement channels

CODING TYPE

Reference downlink

Reference uplink

MEASURE__12.2

[1], A.3.1

[3], A.2 and [4], A.2

MEASURE__64

[1], A.3.2

[3], A.3 and [4], A.3

MEASURE_144

[1], A.3.3

[3], A.4 and [4], A.4

MEASURE_384

[1], A.3.5

[3], A.5 and [4], A.5

AMR_CODER

[5], 4.1.1.3.1.2

[5], 4.1.2.2.1.2

To simplify the implementation of channel decoding in the test receiver the two interleaver stages in the
measurement channels can separately be switched on and off.

----------------------

Channel Coding

-----------------------------------------------------------------------------

CHANNEL CODING
STATE

Switch for activating or deactivating the channel coding of all enhanced
channels.
In the OFF state, the following menu parameters are not effective:
CODING TYPE,
INTERLEAVER 1,
INTERLEAVER 2,
CODING (enhanced channel specific).
IEC/IEEE-bus command

:SOUR:W3GP:BST:ENH:CCOD ON

CODING TYPE

Setting the channel coding type of all enhanced channels.
The 3GPP specification currently stipulates 4 predefined MEASUREMENT
channel coding types which differ in the input data bit rate to be processed
(12.2, 64, 144 and 384 KBPS). The additional AMR_CODER coding scheme
generates the coding of a speech channel.
For channel coding, the input data bits are taken from the data source
specified in menu parameter DATA. The bits with a higher data rate are
available at the output of channel coding. There are fixed assignments
between the measurement input data bit rate and the output symbol rate, i.e.
the menu parameters SYMBOL RATE DPCH (Downlink) or OVERALL
SYMBOL RATE are adapted automatically.
MEASURE_12.2

Measurement channel 12.2 kbps

MEASURE_64

Measurement channel  64 kbps

MEASURE_144

Measurement channel  144 kbps

MEASURE_384

Measurement channel  384 kbps

AMR_CODER

Channel coding for AMR Coder

IEC/IEEE-bus command

:SOUR:W3GP:BST:ENH:CCOD:TYP M12K

INTERLEAVER 1,2

Switch for separately activating or deactivating channel coding interleaver stages 1
and 2 of all enhanced channels. (The interleaver stages do not change the symbol
rate.)
IEC/IEEE-bus command

:SOUR:W3GP:BST:ENH:CCOD:INT1 ON

Содержание 1125.5555.02





































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды