Ricoh InfoPrint 4100 TD3, Руководство по эксплуатации

Страница: 439 / 462

Procedure:
Procedure
1.
Select Frequent Tasks
→
Remote terminals to display the Remote Terminals
panel.
2. Select InfoPrint Manager .
3. At the top of the Main touch panel, select the Logon button to display the
Logon window.
4. In the Logon window, enter the following to log onto the AIX server where
InfoPrint Manager is installed:
v
User ID on Remote Host - enter a valid AIX userid for the InfoPrint
Manager AIX server.
v
Password on Remote Host - enter your password for the InfoPrint Manager
AIX server.
v
IP Address of IPM Host - enter the IP address (in dotted decimal format) of
the InfoPrint Manager AIX server.
5. Select OK to display the Operations GUI. The Operations GUI displays on the
printer console, overlaying the operator console. You can use the printer
console panels and the GUI at the same time by toggling between them using
the
Alt-Tab keys. You should use the keyboard rather than the touch panel
when selecting actions in the GUI.
To close the Operations GUI, select the
-
button in the upper left-hand corner of
the GUI window and then select
Close
from the drop-down list. Closing the
GUI on the printer console also closes the program on the AIX server.
Using the Commercial Print Support (FC 4940/4941)
Note: Feature Code 4940/4941 and Enhanced Commercial Print will never be on
the same printer.
This feature provides hardware and printer adjustments to support a heavy paper
commonly used in the direct mail industry for unenveloped mailing pieces. The
paper is typically referred to as nine point coated stock. The paper is nine
thousandths of an inch thick and coated with a matte or glossy finish. Thinner
coated stocks may also be used, such as eight point or seven point.
This support is not based on weight, or any single property of the paper. The
coating, smoothness, and content of the paper are all key to the solution. It does
not provide universal support for any equivalent weight paper. Holes or labels and
cards attached to the form which may prevent its ability to feed properly. Printing
on preprinted or varnished areas will have degraded fuse quality, depending on
the screen density of the ink.
This paper is supported in Simplex operation on InfoPrint 4100 Models HS2, HS3,
HD3, HD4, HD5, or HD6 or in duplex operation on HD3/4 or HD5/6 systems. For
InfoPrint Models HS2 and HD3/4, both the high and low speed settings are
supported. For InfoPrint Models HS3 and HD5/6, only low speed settings are
supported. Floor configurations must be either L or inline. Tractorless mode is not
supported.
The paper characteristics supported are:
v
Basis Weight = 152 pound text, offset, or book = 61 pound bond/225 gsm
maximum
Appendix. Features
425