Ricoh InfoPrint 4100 TD3, Руководство по эксплуатации

Страница: 250 / 462

What to do next
v
See “Recovering from a forms jam” on page 243.
v
See “Suggestions for preventing jams” on page 245 if the error recurs frequently.
Related tasks
Chapter 7, “Cleaning and Servicing the printer,” on page 255
“Clearing the forms path in the Stacker and Pendulum areas” on page 243
“Aligning forms when forms are broken between printers” on page 160
“Splicing tractored forms” on page 150
Clearing a forms jams in the Transfer Station, the Upper
Fuser, or the Forms Exit area
Before you begin
To clear the jam message from the printer operator panel and the touch panel, you
must press
Auto Load - Stop on the printer control panel.
About this task
The following intervention messages can be displayed when a forms jam occurs in
the transfer station area, the upper fuser area, or the forms exit area:
Intervention Error Code
Transfer Station Forms Jam (Auto Load) 0184
Upper Tractor Forms Jam (Auto Load) 0191
Upper Fuser Forms Jam (Auto Load) 0185
Automatic reprinting is not necessary for this type of jam because printing was not
occurring when this jam was detected.
Note: Be aware that dark-colored backing on the forms can cause the printer to
display these messages.
Procedure:
Do this procedure to clear a forms jam in the transfer station, upper fuser, and
forms exit area.
Procedure
1. Select Auto Load - Stop on the printer control panel.
2. Visually check to see if a forms jam is actually present.
236
Operating the InfoPrint 4100