Ricoh InfoPrint 4100 TD3, Руководство по эксплуатации

Страница: 235 / 462

Table 13. Operator message codes (continued)
Code Description Reference
07D8 Incorrect Retractor Gap Position -
Tractorless Enhanced Commercial
Print The Transfer Station Gap Lever is not in
the expected position.
1. Move the Transfer Station Gap Lever
to the bottom position.
2. Select Start to continue printing.
3. Call for service if the problem
continues.
07D9 Incorrect Retractor Gap Position The Transfer Station Gap Lever is not in
the expected position.
1. Move the Transfer Station Gap Lever
to the top position.
2. Select Start to continue printing.
3. Call for service if the problem
continues.
07DA Lift Pin Position Error The lift pins are not in the expected
position.
1. Move the Lift Pin Lever to the 3 mm
position.
2.
Select
Start
to continue printing.
3.
Call for service if the problem
continues.
07DB Lift Pin Position Error Forms
→
Form Settings
→
Commercial
Print is set to Yes , but the lift pins are
not in the expected position.
1. If using 9pt forms, move the Lift Pin
Lever to the 10 mm position.
2. If 9pt forms are not loaded, set
Forms → Form Settings →
Commercial Print to No .
3. Select Start to continue printing.
4. Call for service if the problem
continues.
07DC Lift Pin Position Error The lift pins are not in the expected
position.
1. If 9pt forms are not loaded, move the
Lift Pin Lever to the 3mm position.
2. If using 9pt forms, set Forms
→
Form
Settings → Commercial Print to Yes
and move the Lift Pin Lever to the 10
mm position.
3. Select Start to continue printing.
4. Call for service if the problem
continues.
D204 Pre/postprocessor NOT READY line
became active. See “Clearing a forms jam in a
postprocessing device” on page 239 or
“Clearing a forms jam between the
printer and a postprocessing device” on
page 238.
D21F Page too complex Page needs to be redesigned.
Chapter 6. Taking care of problems
221