Ricoh InfoPrint 4100 TD3, Руководство по эксплуатации

Страница: 199 / 462

About this task
Do this procedure to advance forms using the NPRO button.
Procedure:
Procedure
1. Press Stop .
2. Press NPRO on the Align Forms panel.
3. Select Forms
→
Advance Paper (NPRO) to display the Advance Paper (NPRO)
panel. Starting with the page at the transfer station, the forms move through
the printer to the forms exit area. The distance they move is the fixed NPRO
length plus an additional length if either the
NPRO Length value Printer
Definition
→
Printer
→
Setup ) or the Pre/postprocessor Extended NPRO
( Printer Definition
→
Pre/Postprocessing ) value is set to a non-zero value.
Advancing one page using NPRO
Before you begin
NPRO is usable only under certain conditions, which balance safety considerations
with operator convenience.
The following conditions must be met before NPRO can function:
v
The printer is in a Not Ready state.
v
Forms are loaded.
v
And the following printer conditions are not present:
– Program Check
– Out of Supplies
– Printer Error
– Intervention Required (except 078A
END OF FORMS ).
v
There are no intervention conditions present on any preprocessing or
postprocessing devices except 078A
END OF FORMS
.
About this task
Do this procedure to advance the forms one page using the Advance One Page
button.
You may do the following steps at either a printer operator panel or at the Main
touch panel. Whichever you choose, perform all the required steps at the same
panel.
Procedure:
Procedure
1. Select Stop .
2.
Select
NPRO
on the Align Forms panel or the printer operator panel.
3. Select Forms
→
Advance Paper (NPRO) to display the Advance Paper (NPRO)
panel.
4.
On the Advance paper (NPRO) panel, select Advance One Page . Forms
advance to the next top-of-page position.
Chapter 5. Working with forms
185