Ricoh InfoPrint 4100 TD3, Руководство по эксплуатации

Страница: 419 / 462

Appendix. Features
This section describes the following Feature Codes and RPQs. Some Feature Codes
and RPQs may not be available, depending on your printer model.
v
Move Mark Forms feature (RPQ 8B3964)
v Side 2 Verify Disable feature (RPQ 8B4282)
v
Dual Toner Mark/Side Verify Sensor feature (FC 4570)
v
Signature Page feature (FC 4553 or 4554)
v
Forms Size Check feature (RPQ 8B4027)
v
8.0" Forms Width Support (RPQ 8B5045)
v
Productivity Tracking Feature (FC 4565)
v
MICR feature (FC 4481) for InfoPrint Models TS2, TS3, TD3/4, and TD5/6
v
Internal Stacker feature (FC 4770) and Stacker Basket Extension feature (FC 4775)
for InfoPrint Models
v
Forms Identification (Bar Code) feature (FC 4464)
v Universal Printer Pre- and Postprocessing Interface (UP3I) feature (FC 4740)
v
InfoPrint Manager Operations for AIX feature (FC 4560)
v
Commercial Print Support (FC 4940)
Using the Move Mark Forms feature (RPQ 8B3964)
Before you begin
Feature Code 8B3964 must be installed and enabled to use this feature. Your
service representative must install all special features.
About this task
Do this procedure to enable the Move Mark Forms feature.
When this feature is enabled, jobs that use mark forms will print with a new, more
visible, mark forms pattern on the header and trailer pages. The new pattern is
longer and is printed on the edges of the page
(1)
rather than in the center.
405