Ricoh InfoPrint 4100 TD3, Руководство по эксплуатации

Страница: 303 / 462

Changing the developer mix
Before you begin
You need the following items when you change developer mix:
v
Developer mix
v
An empty developer mix bottle
v Soft cloth or paper towels
About this task
Procedure:
Do this procedure when you see the following message: 0788
Change Developer
Mix
or 0789
Developer Drain Open
.
Note: You do not have to replace developer mix the first time you see the
Change
Developer Mix
message. To bypass the message, select Check Reset on the touch
panel.
The
Change Developer Mix
message reappears each time end-of-forms is reached,
and every 4 000 feet of forms thereafter if you are using a roll-feed preprocessing
device. When 50 000 additional feet of forms have been processed since the
message originally appeared, you
must change developer mix before you can
return the printer to Ready status.
Tip:
v
Developer mix is slippery, and working with it can be messy. You may want to
spread papers on the floor under the developer drain hose and under the
developer mix inlet to catch spills.
v
If you get developer mix on your hands, wipe it off as soon as possible.
v
On the InfoPrint 4100, you must pour the developer mix slowly to avoid spills.
Procedure
1.
Open the center front cover, the center top cover, and the right front cover as
shown.
Chapter 7. Cleaning and Servicing the printer
289