Instruction manual
Page 129 / 189
Copyright © REA Elektronik
REA JET HR
pro
2K / 4K
V 3.5x_001 28.05.2015
4.2.18.3.5
Assembly instructions for the sensor plug connection
Figure 177: Strip insulation measurements for the sensor plug connection
Figure 178: Assembly sequence of the sensor plug connector
4.2.18.3.6
Alternative connection of a product sensor via the digital inputs
In many applications, the print is triggered via the sensor input to one of the connected print heads.
Alternatively, printout can also be triggered via the digital inputs of the control device. The inlet can
be freely selected here. As an accessory, REA JET offers a cable to connect sensors with standard
M12 plug connections. This cable is available in various lengths. The switch output is hardwired on
input 3. Additional power supply is not necessary. This is done with this cable directly via the
control device.
Figure 179: Scope of delivery of the cable for the connection of a product sensor at digital input 3 of REA JET HR
pro
2K/4K.
Name
Article
number
Product sensor connection cable
M12, L=3m,
M12 - M16, socket/plug
- Sensor output wired on digital input 3
of the HR
pro
054.854.030
Product sensor connection cable
M12, L=6m,
054.854.060
Product sensor connection cable
M12, L=10m,
054.854.100
