Instruction manual
Page 126 / 189
Copyright © REA Elektronik
REA JET HR
pro
2K / 4K
V 3.5x_001 28.05.2015
4.2.18.1.3
Safety warnings for REA JET print head cable connection
Figure 168: View of the warnings on the REA JET print head cable
The print head cable may only be connected/disconnected
when the control device has been activated/deactivated.
Activation or deactivation while under voltage can cause the
destruction of parts in the control device and/or the print head.
Such damages are neither covered by insurance nor by a
guarantee.
4.2.18.1.4
REA JET print head cable lettering
Figure 169: View of the lettering of the REA JET print head cable with one of the included cables
The REA JET print head cable can be equipped with lettering carriers at both ends. In connection
with the matching labels, cables can be easily labeled in correspondence with the respective
installation.
Figure 170: Labeled inscription labels
Figure 171: Blank inscription labels
Each scope of delivery includes two naming branches each with 8 labeling strips (packed in the CD
sleeve). These each contain 2 labels in Germanwith "Schreibkopf 1", 2", 3", 4" and 2 signs each
in English with "print head 1", 2", 3" 4" . For individual marking, a set with two empty naming
branches is available under order no. 054.450.010. The labeling strips can be easily and loss-
resistantly placed in the marking carrier.
