Rauch AXEO 16.1, Инструкция по эксплуатации

Страница: 98 / 136

Spreading work 8
90
8.4 Spreading grit
When spreading grit, please observe the following:

Using agitator RWK AX 160 . Refer to 11.6.2: RWK AX 160, page 114 .

For spreading grit, a PTO speed of 450 rpm and/or a disc speed of 200 rpm
is sufficient.

Before each transportation drive, the drive is to be disengaged.

Slowly couple the PTO shaft at a low motor speed of the tractor in order to
prevent damage to the agitator drive.

With a closed metering slide, even for short distances, switch off the machine
drive.

Open the metering slide until unobstructed discharge of grit at the agitator.
With temperatures below 0 °C, moist spreading material may freeze in the hopper
and damage the agitator when the PTO shaft is switched on.

Ensure that the spreading material cannot freeze in the hopper.

Do not leave filled machines outside over night.

Keep spreading materials dry.
Cleaning/maintenance Page

Open the metering slide

Remove spreader from tractor

Cleaning and maintenance Page 97
n
WARNING
Risk of injury caused by spreading material
Ejected spreading material may lead to injuries.
 Ensure that nobody is present in the hazard zone.