Rauch AXEO 16.1, Инструкция по эксплуатации

Страница: 103 / 136

Spreading work
95
8
8.9 Discharging residual material
We recommend emptying the machine immediately after every use to maintain
its value and to ensure a fault-free spreading operation.
1. Deactivate the drive and switch off the tractor motor.
2. For collecting the spreading material, place a foil under the machine or posi-
tion a sufficiently sized hopper beneath the outlet.
3. Lower the spreading width limiter completely.
4. Open the metering slide fully.
5. Deactivate the tractor motor and the drive of the machine and empty the hop-
per until no spreading material is discharged.
6. Deactivate the drive of the machine and switch off the tractor motor. Remove
the ignition key of the tractor.
7. While the metering slide is open, move the drop point back and forth until the
last spreading material residues have fallen out.
n
WARNING
Risk of crushing and shearing in the area of the application
rate adjustment unit
When untightening the setscrew of the application rate limit stop,
the slide lever may move unexpectedly against the end of the
guide slot and cause severe injuries to the fingers.
 Only untighten the setscrew of the application rate limit stop
if the metering slide is closed.
 Do not place fingers in the guide slot of the application rate
adjustment unit.
 If the machine is parked on its own (without tractor), fully
open the metering slide. Hydraulic cylinder at limit stop,
return spring still tensioned.
n
WARNING
Risk of injury due to rotating machine components and
spreading material
Contact with rotating machine components (universal drive shaft,
spreading disc) may cause bruises, abrasions and crushing inju-
ries. Body parts or objects may be caught and pulled in.
Ejected spreading material may lead to injuries.
 Stay out of the range of the rotating machine components
while the machine is running.
 Direct all persons out of the danger zone of the machine
before discharging the residue.