Rauch AXEO 16.1, Инструкция по эксплуатации

Страница: 22 / 136

Safety 3
14

If you have to work while the PTO shaft is rotating, make sure that nobody is
near the PTO or the drive shaft.

Only remove any clogging in the hopper while the machine is at a standstill
and never with your hand or foot; for this purpose, suitable tools must be
used. In order to avoid clogging, the hopper may only be filled when the pro-
tective grid is mounted.

Before cleaning the machine with water, steam jet or other cleaning agents,
cover all components that must not get wet (e.g. bearings, electrical connec-
tions).

Regularly check nuts and screws for tightness. Retighten loose connections.
3.9 Safety in traffic
When driving on public streets and roads, the tractor with the attached machine
must comply with the road traffic regulations of the respective country. The owner
and driver are responsible for compliance with these regulations.
3.9.1 Checks before driving
The pre-departure check is an important contribution to road safety. Before every
trip, check compliance with the operating conditions, traffic safety, and the regu-
lations of the country of use.

Is the permissible total weight complied with? Note the permitted axle load,
the permitted braking load, and the permitted tyre load capacity;
See also
“Axle load calculation“ on page 119 .

Check the tyre pressures and the function of the tractor brake system.

Is the machine attached appropriately?

Could spreading material be lost while travelling?
-
Check the filling level of the spreading material in the hopper.
- The metering slide must be closed.
- The ball valves must also be closed on single-acting hydraulic cylinders.
- Switch off the electronic control unit.

Does the lighting and marking of the machine comply with the regulations of
your country with respect to driving on public roads? Make sure that warning
signs, reflectors, and auxiliary lights are correctly placed.