Rauch AXEO 16.1, Инструкция по эксплуатации

Страница: 96 / 136

Spreading work 8
88
Select the PTO speed and/or the spreading disc speed in such a way that the de-
sired spreading width can be achieved and no deposits form on the spreading
disc. A low PTO speed/spreading disc speed reduces the wear on the agitator
and spreading disc.
Particularly hard spreading material, e.g. grit, increases the wear on the spread-
ing vanes.
For spreading, select the PTO speed and/or the spreading disc speed with which
you have carried out the calibration test.
Always use the supplied protective grid to prevent blockages, e.g. caused by for-
eign objects or spreading material clumping.
Claims for damages other than for damage to the machine itself will not be ac-
cepted.
This also means that no liability will be accepted for damage resulting from
spreading errors.
8.2 General information on the agitator
Depending on the spreading material, 5 different agitators are available.
Agitator type Application/spreading material Page
RWK AX 140 Granulated fertiliser Page 93
RWK AX 160 Grit Page 90
RWK AX 180 Sand and moist salt Page 91
RWK AX 220 Dry salt Page 92
RWK AX 240 Grit-salt mixtures Page 92
n
CAUTION
Possible material or environmental damage
The rotating agitator may lead to an increased wear or hardening
of the spreading material if the metering slide is closed. This hard-
ening can impact or completely hinder the discharge of spreading
material.

Always deactivate the agitator when the metering slide is
closed.
2057022
Arrêter l'agitateur quand
les vannes sont fermées !
CAUTION!
Rührwerk bei geschlossenem
Schieber ausschalten!
ATTENTION!
Switch the agitator off
when the sliders are closed!
ACHTUNG!