Rauch AXEO 16.1, Инструкция по эксплуатации

Страница: 55 / 136

Commissioning
47
6
6.10 Parking and unhitching the machine
You can securely place the machine onto the frame.
Requirements for parking the machine:

Only park the machine on even and firm ground.

Only park the machine when the hopper is empty.

Relieve the load on the coupling points (lower/upper link) before removing the
machine.

After unhitching, place the universal drive shaft, hydraulic hoses, and electric
cables in the retainers provided for the purpose.
Instructions on hydraulic metering slide actuator
Please observe the following instructions on switching off the machine equipped
with hydraulic metering slide actuator.
n
DANGER
Crushing hazard between the tractor and the machine
Persons standing between the tractor and the machine while they
are being parked or unhitched are in lethal danger.
 Ensure that nobody is present in the hazard zone between
the tractor and the machine.
n
WARNING
Risk of crushing and shearing in the area of the application
rate adjustment unit
When untightening the setscrew of the application rate limit stop,
the slide lever may move unexpectedly against the end of the
guide slot and cause severe injuries to the fingers.
 Only untighten the setscrew of the application rate limit stop
if the metering slide is closed.
 Do not place fingers in the guide slot of the application rate
adjustment unit.
 If the machine is parked on its own (without tractor), fully
open the metering slide. Hydraulic cylinder at limit stop,
return spring still tensioned.