Rauch AXEO 16.1, Инструкция по эксплуатации

Страница: 119 / 136

Faults and possible causes
111
10
10 Faults and possible causes
n
DANGER
Risk of injury and accident from omitted or inadequate trou-
bleshooting
Delayed or incorrect repairs by unqualified persons may result in
incalculable risks with negative consequences for persons, the
machine, and the environment.
 Any faults are to be rectified immediately .
 Only carry out repairs yourself if you have the appropriate
qualifications.
Fault Possible cause/action
Uneven distribution of spreading
material

Remove spreading material deposits from spreading
disc, spreading vanes and outlet.

Worn spreading vanes. Exchange spreading vanes.

Metering slide does not open completely. Check function
of opening slide.

Drop point incorrectly adjusted. Correct the setting.
Irregular spreading material feed
to spreading disc

Check agitator and replace it, if required.

Clear blockages.
Spreading disc flutters.

Check for tight seat.
Metering slide does not open.

Metering slide does not move easily. Check slide, lever
and joints for smooth movement and improve if neces-
sary.

Check the extension spring.

The reducing plate at the hose connection of the plug-in
connector is contaminated.

Power supply to actuator interrupted.
The metering slide opens too
slowly.

Clean orifice plate. The plate is located at the hose con-
nection of the plug-in connector.
Agitator not working.

Check for wear.

Check clamping pins for damage and wear.