Rauch AXEO 16.1, Инструкция по эксплуатации

Страница: 43 / 136

Commissioning
35
6
6.3 Mounting the universal drive shaft (versions H, Q, C)
Depending on the version, the machine can be equipped with a transmission as
drive for the spreading disc and agitator.
Depending on the version, the machine may be equipped with different universal
drive shafts:

Universal drive shaft with full protection

Universal drive shaft with ratchet clutch and full protection Refer to
11.9: Universal drive shaft with ratchet clutch, page 116 .
6.3.1 Checking the length of the universal drive shaft

Check the length of the universal drive shaft during its first assembly to the
tractor.
 Universal drive shaft tubes that are too long can result in damage to the
universal drive shaft and the machine.
n
CAUTION
Material damages due to unsuitable drive shaft
The machine is delivered with a drive shaft that is designed according
to the device and performance.
The use of incorrectly dimensioned or inadmissible drive shafts, for
instance without guard or suspension chain, may cause personal
injury or lead to damage to the tractor and/or the machine.
 Use universal drive shafts approved by the manufacturer only.
 Follow the directions in the operator’s manual of the universal
drive shaft manufacturer.
NOTICE
Observe the installation and shortening instructions provided in the operator's
manual of the drive shaft manufacturer when checking and adjusting the drive
shaft. The operator's manual is attached to the drive shaft on delivery.