Rauch AXEO 16.1, Инструкция по эксплуатации

Страница: 108 / 136

Maintenance and service 9
100
7. Push the metering slide against the pin.
8. Tighten the setscrew.

The secured pin.

The stop at the lower scale plate (metering scale) is at scale value 24. If
the position is not correct, the scale must be reset.
Adjustment:
The metering slide is in the position of step 7 (lightly pressed against the pin).
9. Untighten the mounting screws [1] at the scale plate.
Figure 9.3: Adjustment scale of metering slide
10. Adjust the scale plate in such a way that the scale value 24 lies exactly under
the pointer element.
11. Tighten the scale plate with a mounting screw.
12. Remove the pin.
13. Engage the electric or hydraulic cylinder.
14. Engage the return spring.
15. Assemble agitator and close maintenance cover.
5. Take a pin [1] with a diame-
ter of
25 mm .
6. Insert the pin into the meter-
ing opening.
Figure 9.2: Pin in metering opening
1 1