Rauch AXEO 16.1, Инструкция по эксплуатации

Страница: 65 / 136

Machine settings
57
7
7.5 Adjusting the spreading width limiter
By means of different positions, the spreading width limiter enables spreading
widths of approx.
1 m - 8 m with a mounting height of approx. 55 cm (see spec-
ification of the mounting height Page 41 ).
Depending on the machine equipment, 4 different spreading widths can be set.
Type of spreading width adjustment Characteristics
Mechanically, can be set separately on
the left and right. Enables symmetric and asymmetric
spreading patterns.
Electrically, with an actuator on the right
side. Both sides are connected by a
coupling rod (optional). Enables adjustment of the symmetric
spreading pattern while spreading.
Electrically, with separate actuators on
the left and right side (optional). Enables switching from a symmetric to
an asymmetric spreading pattern
while spreading.
Electrically, with an actuator on the left
or right side (optional). Enables single-side adjustment of the
symmetric spreading pattern while
spreading.
NOTICE
Check the proper condition of the spreading width limiter. Damaged or bent ele-
ments of the spreading width limiter affect the spreading pattern.