Rauch AXEO 16.1, Инструкция по эксплуатации

Страница: 59 / 136

Machine settings
51
7
7.2 Spreading disc and agitator speed adjustment
7.2.1 PTO drive
For the speed to be set at the spreading disc or the agitator, please refer to the
fertiliser chart
7.2.2 Drive with hydraulic motor (Version H-100/200, Q-100/200, C-100/200)
At machines with hydraulic drive, the speed is set at the flow control valve. For
the values to be set, refer to the following table.
NOTICE
If drop point adjustment is not sufficient for setting a symmetric spreading pat-
tern, adjust the vanes on the spreading disc. Refer to
7.8: Setting the spreading
vanes, page 61 .
NOTICE
With smaller working widths and good spreading material quality, the agitator
speed can be reduced.
NOTICE
If drop point adjustment is not sufficient for setting a symmetric spreading pat-
tern, adjust the vanes on the spreading disc. Refer to
7.8: Setting the spreading
vanes, page 61 .
n
CAUTION
Possible spreading errors and property damage
Incorrectly set spreading disc or agitator speed may lead to
increased wear or spreading errors.
 For the speed to be set for the respective spreading mate-
rial, please refer to the fertiliser chart.