Rauch AXEO 16.1, Инструкция по эксплуатации

Страница: 21 / 136

Safety
13
3
3.8 Maintenance and service
Maintenance and service work involves additional hazards that do not occur dur-
ing operation of the machine.

Any maintenance and service work is to be conducted with increased alert-
ness at all times. Work particularly thoroughly and cautiously.
3.8.1 Qualifications of maintenance staff

Welding and work on the electrical and hydraulic systems is to be carried out
by qualified technicians only.
3.8.2 Wear parts

The maintenance and service intervals described in the present operator's
manual are to be strictly adhered to at all times.

Furthermore, the maintenance and service intervals of the supplier compo-
nents must also be complied with. See the supplier documentation for the rel-
evant intervals.

We recommend that you have the condition of the machine checked after
each season by your specialist dealer, paying particular attention to its fixing
components, safety-relevant plastic components, hydraulics, metering parts
(such as metering slide and agitator), spreading vanes and spreading discs.

Spare parts must at least comply with the technical requirements specified by
the manufacturer. Compliance with technical requirements is ensured using
original spare parts.

Self-locking nuts are designed to be used only once. Always use new self-
locking nuts to fasten components (e.g. when replacing spreading vanes or
maintenance covers).
3.8.3 Maintenance and service work

Always switch off the tractor motor before any cleaning, maintenance and
service work and when troubleshooting. Wait until all rotating parts of the ma-
chine have come to a standstill.

Make sure that no unauthorised person can start the machine. Remove the
ignition key of the tractor.

Check that the tractor with the machine is correctly parked. Park them with an
empty hopper on level, solid ground and secure them to prevent them from
moving.

Additionally secure the lifted machine against falling down (e.g. by means of
a safety stand) when carrying out maintenance and repair work or inspections
under the lifted machine.

Release the pressure from the hydraulic system before any maintenance and
repair work.

Disconnect the power supply before working on the electrical system.

Only open the maintenance cover at the hopper if the machine has been de-
commissioned.

Only open the protective grid in the hopper if the machine has been decom-
missioned.