Rauch AXEO 16.1, Инструкция по эксплуатации

Страница: 120 / 136

Faults and possible causes 10
112
Blockage of the metering open-
ings due to: lumps of spreading
material, damp spreading materi-
al, other impurities (leaves, straw,
sack residues)

Clear blockages. Proceed as follows:
1. Park the tractor, remove the ignition key,
2. Open metering slide,
3. Place collecting vessel underneath,
4. Clean the outlet
from below with a wooden pole or the ad-
justment lever and push through the metering opening.
5. Remove any foreign objects in the hopper.
6. Close the metering slide.

Or carry out fast emptying at the QUANTRON-K2 control
unit while the agitator is running.
The spreading disc does not ro-
tate or stops suddenly after being
turned on. When using an universal drive shaft with shear pin protec-
tion:

Check the shear pin protection, replace the shear pin as
necessary (refer to the operator's manual of the universal
drive shaft manufacturer).
For hydraulic drive (H and HydroControl):

Check the plug connector of the hydraulic hoses.

Check the connector of the machine cable.
Fault Possible cause/action